Blog

Power Bank Testing: How to Check Power Bank Capacity? Jan 13 , 2024

How to Check Power Bank Capacity? This is a question. In order to accurately measure the actual capacity of the power bank, we need to use a professional power bank capacity tester. Figure 1. Power Bank Capacity Tester The process steps for power bank testing are as follows: Step 1: Connect the power bank to the charging port and discharge port of the power bank checker. Step 2: Open the professio...

Tags :

WinAck RJ-series Regenerative Battery Test System Dec 15 , 2023

WinAck Group, as a professional battery charge discharge test equipment manufacturer, has several series of battery test systems ranging from small single cells to big battery packs. Among them, RJ-series regenerative battery test system is a popular and advanced battery pack cycler with high testing accuracy, rich charging and discharging modes, independent control of each channel, support ...

Tags :

Battery Fast Charging Performance Test | Battery Charging Test Apr 10 , 2023

The purpose of the battery charging performance test is to check the charging ability of the lithium-ion battery in different states. Battery charging performance test includes battery slow charging performance test and battery fast charging performance test. Among them, battery fast charging refers to the mode of charging at a higher current rate. Fast charging is usually the act of charging at h...

Tags :

Battery Slow Charging Performance Test | Battery Charging Test Mar 28 , 2023

The purpose of the battery charging performance test is to check the charging ability of the lithium-ion battery in different states. Battery charging performance test includes battery slow charging performance test and battery fast charging performance test. Among them, battery slow charging refers to a mode of charging at a lower rate. The battery slow charging performance test is performed at a...

Tags :

Common Problems and Improvement Direction of Battery Stacking Machine Mar 17 , 2023

As one of the core processes of lithium battery electrode manufacturing process, battery stacking machine is extremely important in the whole battery cell production process. The battery stacking process requires a high degree of stacking precision, which has a great impact on the quality of the stacked battery cells. Figure 1. Automatic battery cell electrode stacking machine At present, the comm...

Tags :

The Direction of Improvement of Electrolyte Filling Machines Feb 20 , 2023

The electrolyte filling process is a key part of lithium battery manufacturing, and the electrolyte filling weight directly affects the electrochemical performance and safety of the battery cells With the rapid development of lithium battery industry, battery manufacturers have higher and higher requirements for electrolyte filling accuracy, electrolyte filling machine stability and electrolyte fi...

Tags :

Battery Internal Resistance Test: ACIR and DCIR | Battery Testing Feb 06 , 2023

To measure the internal resistance of a battery, there are two methods, one is the AC method and the other is the DC method. The so-called ACIR is the value of internal resistance of the battery measured by AC method. The measurement principle of ACIR is that the measurement current is applied with a measurement frequency of 1 kHz and the internal resistance of the battery is calculated from the v...

Tags :

EV Battery System Self-discharge Performance Test | EV Battery Testing Jan 31 , 2023

The purpose of the battery self-discharge performance test is to verify the charge retention capability and charge recovery capability of EV battery systems under long-term standing conditions. At the same time, the voltage difference of the minimum monitoring units in the battery self-discharge performance test can be used as a basis for whether there is a hidden danger of internal short circuit ...

Tags :

EV Battery Start-Up Capability Testing | EV Battery Testing Dec 26 , 2022

The EV battery system start-up capability testing is mainly to verify the EV battery system start-up output power at low temperature and low SOC. The brief method of EV battery system start-up capability testing is as follows: perform a constant voltage discharge with a maximum current limit based on the maximum pulse discharge current specified by the battery cell manufacturer and collect the vol...

Tags :

Dry Electrode Manufacturing Process and Equipment Dec 05 , 2022

Dry electrode technology is a battery electrode manufacturing process without solvents, and both anode and cathode electrode preparation can be applied. The dry electrode process eliminates the solvent and also enhances the performance of the battery electrode, and simplifies the electrode preparation process with less equipment investment. Compared to wet electrode manufacturing, the process inno...

Tags :